Loading rate and confining pressure effect on dilatancy,acoustic emission,and failure characteristics of fissured rock with two pre-existing flaws

Investigating the dilatancy, acoustic emission and failure characteristics of fissured rock are significant to ensure their geotechnical stability. In this paper, the uniaxial and triaxial compression experiments with AE monitoring under different loading rates were carried out on fissured rock specimens with the same geometrical distribution of two pre-existing flaws. The dilatancy and AE activity of these specimens were discussed, and the effects of the confining pressure and loading rate on the mechanical parameters and failure characteristics were analyzed. The results show that the exponential strength criterion is more suitable than the Mohr–Coulomb strength criterion to characterize the strength characteristics of fissured rock. The crack evolution and failure characteristics of fissured rock specimens are more complicated than those of intact rock specimens. The failure characteristics of the fissured rock follow the tensile shear coalescence model, crack branching occurs with increasing the loading rate, and the multi-section coalescence model is verified with increasing the confining pressure. The phenomena of stress drop and yield platform usually occur after the dilatancy onset, the specimen does not fail instantaneously, and the propagation and coalescence of cracks cause a sharp increase in the AE signals, circumferential strain, and volumetric strain.     

Wave mixing in coupled phononic crystals via a variable stiffness mechanism

We investigate wave mixing effects in a phononic crystal that couples the wave dynamics of two channels – primary and control ones – via a variable stiffness mechanism. We demonstrate analytically and numerically that the wave transmission in the primary channel can be manipulated by the control channel's signal. We show that the application of control waves allows the selection of a specific mode through the primary channel. We also demonstrate that the mixing of two wave modes is possible whereby a modulation effect is observed. A detailed study of the design parameters is also carried out to optimize the switching capabilities of the proposed system. Finally, we verify that the system can fulfill both switching and amplification functionalities, potentially enabling the realization of an acoustic transistor.     

On holographic reconstruction without reference: Application to machinery noise and comparison with multi-reference holography approach

This article presents the implementation and application, to two complex machines, of two holography methods called CIBNAH (Complex Intensity Based Near-field Acoustic Holography) and MRNAH (Multi Reference Near-field Acoustic Holography) based on residual spectra. The first is a newly developed method that uses complex sound intensity as its basis and hence bypasses the need for reference signals. Here, several approaches are presented to validate both methods and to investigate each method’s advantages and limitations.     

Liquid hydridosilane precursor prepared from cyclopentasilane via sonication at low temperatures without the action of light

We report on a liquid hydridosilane precursor ink prepared via the ultrasonically induced ring-opening polymerisation of cyclopentasilane (Si₅H₁₀) without irradiation by ultraviolet light. The sonication is carried out in N₂ atmosphere at temperatures between 20 and 75 °C. We use size exclusion chromatography (SEC) to show polymer growth and estimate molecular mass with increasing sonication time. In combination with UV–vis transmission measurements, further SEC analysis is used to compare solutions subjected to either purely thermal or ultrasonic treatment at the same process temperature and for the same duration. Our findings provide strong evidence showing that the initiation of the polymerisation is sonocatalytic in nature and not thermic due to the macroscopic temperature of the solution. The liquid precursor is used to produce homogeneous hydrogenated amorphous silicon (a-Si:H) thin films via spin coating and pyrolytic conversion. The optoelectronic properties of the films are subsequently improved by hydrogen radical treatment. Fourier transform infrared spectroscopy (FTIR) is used to determine a compact film morphology and electrical conductivity measurements show that the layers attain a light-to-dark photosensitivity ratio of 2 × 10³ making them suitable for application in optoelectronic devices.     

Nmr and Mass Spectroscopic Studies of the Competitive-Angiotensin II Antagonist “Sarmesin”

Fast atom bombardment mass spectrometry (FAB-MS) and high resolution (400 Mz) proton nuclear magnetic resonance (NMR spectroscopy) on the competitive angiotensin II antagonist, |Sar¹, Tyr(Me)⁴ (ANGII (Sarmesin) and its he-ptapeptide homolog, [Tyr(Me)³ |ANGIII, yield spectra which provide confirmation of structure and molecular weight. The characteristics of the spectra are discussed and compared with the spectra of natural ANG II, ANG III and |Sar¹|ANG II. The NMR data are suggestive of interactions in angiotensin between: 1) the phenolic hydroxyl group and the imidazole ring, and 2) the N-terminal amino group and the Tyrring. These interactions may be important for the formation of the proposed charge transfer system in angiotensin II involving the phenoxyl and α-carboxylate groups.     

A computational simulation study on the acoustic pressure generated by a dental endosonic file: Effects of intensity,file shape and volume

One of the uses of ultrasound in dentistry is in the field of endodontics (i.e. root canal treatment) in order to enhance cleaning efficiency during the treatment. The acoustic pressures generated by the oscillation of files in narrow channels has been calculated using the COMSOL simulation package. Acoustic pressures in excess of the cavitation threshold can be generated and higher values were found in narrower channels. This parallels experimental observations of sonochemiluminescence. The effect of varying the channel width and length and the dimensions and shape of the file are reported. As well as explaining experimental observations, the work provides a basis for the further development and optimisation of the design of endosonic files.     

Selectivity of seismic electric signal (SES) of the 2000 Izu earthquake swarm: a 3D FEM numerical simulation model

Although seismic electric signal (SES) has been used for short-term prediction of earthquakes, selectivity of SES still remains as one of the mysterious features. As a case study, we made a numerical simulation based on a 3D finite element method (FEM) on the selectivity of SES observed in the case of the 2000 Izu earthquake swarm. Our numerical results indicated that the existence of conductive channel under Niijima island could explain the reported SES selectivity.     

Fiber optical parametric amplifiers in optical communication systems

The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase‐insensitive amplifiers (PIAs) and phase‐sensitive amplifiers (PSAs) are considered. Low‐penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength‐ and time‐division multiplexed formats. High‐quality mid‐span spectral inversion has been demonstrated at 0.64 Tb/s, avoiding electronic dispersion compensation. All‐optical amplitude regeneration of amplitude‐modulated signals has been performed, while PSAs have been used to demonstrate phase regeneration of phase‐modulated signals. A PSA with 1.1‐dB noise figure has been demonstrated, and preliminary wavelength‐division multiplexing experiments have been performed with PSAs. 512 Gb/s have been transmitted over 6,000 km by periodic phase conjugation. Simulations indicate that PIAs could reach data rate x reach products in excess of 14,000 Tb/s × km in realistic wavelength‐division multiplexed long‐haul networks. Technical challenges remaining to be addressed in order for fiber OPAs to become useful for long‐haul communication networks are discussed.